Neutrik NAC3 MPA-1

Industrial Connectors / PowerConLocking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. Fast and easy locking system. High current capacity (20 A rated). Extremely robust and reliable. Meets all prevailing safety standards. UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCon is a connector without breaking capacity, i.e. the PowerCon should not be connected or disconnected under load or live!

Mounting connector for 5 - 15 mm cable O.D. rangePremating safety ground

Quicklock with securing lever

With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit

Appropriate plugs are identified by mechanical keyways and by color

Connector type: Powercon (gray)

Plug construction: Mounting version

Made in Europe

IP classification: IP20

Weight: 0,01 kg

Number of contacts: 2 + PE

Rated current per contact: 20 A RMS

Rated voltage: 250 V AC

Dielectric strength: 4000 V DC

Contact resistance:

Insulation resistance after damp heat test: >,100 Mohms

Creepage distance: according to IEC 664-1

Cable retention force: = 220 N, depending on cable dia and material

Wiring: Flat tabs for FASTON 4.8 mm x 0.5 mm (0.187'' x 0.02'') or soldering

Solderability: complies with IEC 68-2-20

Housing: PA 6 30% GR

Insert: PA 6 30% GR

Contacts: CuZn39Pb3 / CuSn6

Contact surface: L+N 20 m Ag plated, Earth 4 m Ag plated

Chuck: POM

Temperature range: -30C to +80C

Flammability: UL94HB